GC THORSEN ELECTRONICS -- EPOXY HARDENER  -- 8040-00-281-2308
<pre>=====================  Product Identification  =====================

Product ID:EPOXY HARDENER
MSDS Date:02/02/1994
FSC:8040
NIIN:00-281-2308
Status Code:A
Kit Part:Y
=== Responsible Party ===
Company Name:GC THORSEN ELECTRONICS
Address:1801 MORGAN STREET
City:ROCKFORD
State:IL
ZIP:61105-1209
Country:US
Info Phone Num:815-968-9661
Emergency Phone Num:(800)424-9300
Chemtrec Ind/Phone:(800)424-9300
CAGE:72653
=== Contractor Identification ===
Company Name:GC THORSEN
Address:1801 MORGAN STREET
Box:City:ROCKFORD
State:IL
ZIP:61105
Country:US
Phone:815-968-9661
CAGE:72653

=============  Composition/Information on Ingredients  =============

Ingred Name:INERT FILLER ( S102 )
CAS:7631-86-9
Fraction by Wt: 25%

Ingred Name:POLYAMIDE CURING AGENT
CAS:68410-23-1
Fraction by Wt: 65%

Ingred Name:TRIETHYLENETETRAMINE
CAS:112-24-3
RTECS #:YE6650000
Fraction by Wt: 10%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Effects of Overexposure:WILL CAUSE BURNS TO EYES AND SKIN.  HIGH
    CONCENTRATIONS OF VAPORS CAN CAUSE SEVER EYE AND RESPIRATORY TRACT
    IRRITATION.  INGESTION CAN CAUSE SEVERE DAMAGE TO MUCOUS MEMBRANES.

=======================  First Aid Measures  =======================

First Aid:EYES:   FLUSH WITH WATER FOR AT LEAST 15 MINUTES - CONSULT
    PHYSICIAN.	SKIN:  WASH WITH SOAP AND WATER - CONSULT PHYSICIAN. 
    INHALATION:  FRESH AIR - OXYGEN IF NECESSARY - CONSULT PHYSICIAN. 
    INGESTIO N:  DO NOT INDUCE VOMITING DILUTE BY GIVING WATER OR MILK
    TO DRINK IF VICTIM IS CONSIOUS - CONSULT PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:>79.4C, 175.F
>175FCC
Extinguishing Media:CO2, H2O, DRY CHEM.
Fire Fighting Procedures:PROVIDE RESPIRATORY PROTECTION IN CONFINED OR
    POORLY VENTILATIED AREAS.
Unusual Fire/Explosion Hazard:COMBUSTION PRODUCTS MAY BE TOXIC.  HEALTH
    3  FLAMMIBILITY 2

==================  Accidental Release Measures  ==================

Spill Release Procedures:SCRAPE UP AND PLACE IN A CLOSED CONTAINER FOR
    DISPOSITION.  AVOID SKIN CONTACT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:LISCENSED INCINERATOR, OR IN
    ACCORDANCE WITH GOVERNMENT REGULATIONS.
Other Precautions:STORE IN A DRY, WELL VENTILATED AREA AT ROOM
    TEMPERAURE.  OTHER:  KEEP CONTAINERS TIGHTLY SEALED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:CARTRIDGE RESPIRATOR IF VENTILATION POOR
Ventilation:LOCAL EXHAUST, MECHANICAL AS REQUIRED TO MEET TLV'S
Protective Gloves:AS NECCESSARY
Eye Protection:CHEMICAL GOGGLES
Supplemental Safety and Health
CLOTHING/GLOVES:  AS NECESSARY TO AVOID SKIN CONTACT.

==================  Physical/Chemical Properties  ==================

Spec Gravity:1.0
Solubility in Water:43%
Appearance and Odor:PALE GREEN PASTE - SLIGHT AMINE ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACID
Stability Condition to Avoid:LONG-TERM HIGH TEMPERATURE
Hazardous Decomposition Products:CO, CO2, MAY BE PRODUCED

====================  Disposal Considerations  ====================

Waste Disposal Methods:LISCENSED INCINERATOR, OR IN ACCORDANCE WITH
    GOVERNMENT REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.